top of page

Adhesives

CB1000-G.jpg

CB1000/1001 Bonding Agent 55%   

Non-Rewettable High Solids Concrete Bonder & Additive

Bonding Agent 55% is non-rewettable, high solids, concrete bonder.  It is easily applied and bonds tightly to concrete, wood, cinder block, metal, brick, stucco, mortar, plaster in patching, plastering and topping applications. Meets ASTM C932

CB4000-Gallon .jpg

CB-4000 Concrete Adhesive 

47% Solids Professional Concrete Admixture

CB-4000 is a 100% acrylic polymer, designed to bond concrete and admixtures used for cement-based materials and mixes.  It significantly improves adhesion, cohesion, tensile, compressive, flexural strengths and mechanical properties. Lanco® CB-4000 will never re-emulsify when exposed to water. It improves freeze/thaw stability of Portland cement-based products. Also recommended for concrete repair and patching, structural repairs and floor toppings. Meets ASTM C932.

CB900-Gallon .jpg

CB900/901 ™ Bonding Agent 31%

Re-Wetable Concrete Bonder

CB-900 / CB-901 is a re-wetable concrete bonding adhesive used for interior or exterior plastering or plastering mix. This thick homopolymer emulsion is used to bond new to old concrete, in walls and ceiling plaster. It adds toughness when used as an additive for applications in cement to cement, cement to wood, plaster, stucco, tile and plaster to plaster. Available in white and blue.

CB510-4US.jpg

CB510/610 ™ Bonding Agent

Re-Wetable Concrete Bonder

CB-510 / CB-610 is a re - wetable concrete bonding adhesive used to bond new to old concrete, in walls and ceiling plaster. It adds toughness when used as an additive for applications in cement to cement, cement to wood, plaster, stucco, tile and plaster to plaster. Available in white and blue.

CB410-4US.jpg

CB410/420  Consumer Grade Concrete Bonder

Consumer Grade Concrete Bonder

 CB-410 / CB-420 is a consumer grade concrete bonding adhesive, used to bond new concrete to old. It withstands humidity and temperatures from 40°F to 300°F (-400°C to 149°C) and can be applied over damp or dry surfaces. It is not affected by lime plaster alkalinity or Portland cement. Available in white or blue.

Supernail.jpg

Supernail 

Multi-Purpose Acryilic Construction Adhesive

Super Nail™ is a construction adhesive designed to bond paneling, hardboard, foam moldings, gypsum wallboard, plywood, particle board, tile board and cork board. It is water based and non-flammable.

Concrebond Pro 932-1Gal.png

Concrebond™ PRO 932

Non-Rewettable High Solids Concrete Bonder & Additive

Concrebond Pro is a modified liquid used to bond fresh concrete, stucco, mortar, or plaster in patching, plastering, and topping applications. It is easy to apply and bonds tightly to concrete, wood, cinder block, metal, brick, asphalt, and masonry. Concrebond Pro does not re-emulsify when exposed to water or extreme moist conditions.

shutterstock_1495005809 [Converted]-01_edited.png
ConcrebondMix-1Gal.png

Concremix™

Solids Professional Concrete Admixture

Concremix is a 100% acrylic polymer with 23% solids, designed for use as a concrete bonding agent and admixture for cement-based materials and mixes.

Bonding Blue US G.png
Bonding White US G.png

Concrebond™ White & Blue

Consumer Grade Concrete Bonder

Concrebond™ is a concrete bonding adhesive for interior or exterior use, used to bond new concrete to old. It withstands humidity and can be applied over damp or dry surfaces without being affected by the alkalinity of lime plaster or Portland cement. Available in white or blue.

shutterstock_1495005809 [Converted]-01_edited.png
shutterstock_1495005809 [Converted]-01_edited.png
bottom of page